Product Details | Easyflex Product Catalog
Introducing the uncoated Vectorflow water CSST. It does not have a polyethylene coating and is purely stainless steel. The uncoated Vectorflow CSST comes in 4 different ID sizes, ranging from 1/2″ to 1-1/4″, and in 3 lengths: 50ft, 100ft, and 150ft. You can be confident in its performance as it is fully certified and approved for use as a water delivery system.
| ID | Part # | Description |
| 1/2″ | EW-012-050 | 1/2″ ID, 50 ft |
| 1/2″ | EW-012-100 | 1/2″ ID, 100 ft |
| 1/2″ | EW-012-150 | 1/2″ ID, 150 ft |
| 3/4″ | EW-034-050 | 3/4″ ID, 50 ft |
| 3/4″ | EW-034-100 | 3/4″ ID, 100 ft |
| 3/4″ | EW-034-150 | 3/4″ ID, 150 ft |
| 1″ | EW-100-050 | 1″ ID, 50 ft |
| 1″ | EW-100-100 | 1″ ID, 100 ft |
| 1″ | EW-100-150 | 1″ ID, 150 ft |
| 1-1/4″ | EW-114-050 | 1-1/4″ ID, 50 ft |
| 1-1/4″ | EW-114-100 | 1-1/4″ ID, 100 ft |
| 1-1/4″ | EW-114-150 | 1-1/4″ ID, 150 ft |
| Hydrostatic Test | Internal hydrostatic pressure increased to 220 ± 7 psi (1516 ± 48 kPa) or 1.5 times the rated pressure, whichever is greater, at the temperature of 68° ± 5° F (20° ± 3° C) for a period of 5 minutes. | ||||||||||||||
| Hydrostatic Burst Test | Internal hydrostatic pressure increased to 588 ± 7 psi (4051 ± 48 kPa) or 4 times that rated pressure, whichever is greater, at the temperature of 68° ± 5° F (20° ± 3° C) for a period of 5 minutes. | ||||||||||||||
| Bending Test | Bending motion being applied uniformly at the rate of 5-6 cycles per minute. | ||||||||||||||
| Hydraulic Shock Test | Subjected to a hydraulic shock for 2,000 cycles at 68° F ± 5° F. The Hydraulic shock shall consist of a sudden increase in pressure from 50 psi (345 kPa) to 284 psi (1967 kPa) lasting 1 second. | ||||||||||||||
| Vibration Test | Filled with water. The amplitude of vibration was 0.2 inches and the frequency was 25 Hz for 3 hours. | ||||||||||||||
| Flattening Test | Pressed to 2/3 D height of the outer diameter until the tube is flat. No signs of cracks or leakage shall be found. | ||||||||||||||
| Impact Test | An impact force of 9.76 to 15.19 lbf·ft was applied to various fitting sizes by using a hammer. | ||||||||||||||
| Toxicity Test | Conforms to NSF/ANSI 61 & 372 | ||||||||||||||
| CSST Material | Stainless Steel 304 (ASTM A 240) | ||||||
| Coating | Polyethylene (ASTM D 335) | ||||||
| Coating Color | Uncoated, Blue PE, or Red PE | ||||||
| Sizes | 1/2″, 3/4″, 1″, 1-1/4″ | ||||||
| Inner Diameter | 0.55″, 0.83″, 1.03″, 1.26″ | ||||||
| CSST Thickness | 0.010″, 0.012″ | ||||||
| PE Coating Thickness | 0.02″ | ||||||
| Available Lengths | 50, 100, 150 ft / Roll (custom lengths available) | ||||||
| Burst Pressure | 588 psi with fittings attached | ||||||
| Rated Pressure | 147 psi at 212˚ F | ||||||
| Maximum Working Pressure | 1/2″ | 220 psi | |||||
| 3/4″ | 176 psi | ||||||
| 1″ | 147 psi | ||||||
| 1-1/4″ | 110 psi | ||||||
| Minimum Bend Radius | Size | Recommended | |||||
| 1/2″ | 3″ | ||||||
| 3/4″ | 3″ | ||||||
| 1″ | 3″ | ||||||
| 1-1/4″ | 5″ | ||||||
| 1-1/2″ | 6″ | ||||||
| 2″ | 8″ | ||||||
| GPM | Nominal Size (ID) | |||||
| 1/2″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″ | 2″ | |
| 1 | 0.032 | 0.004 | 0.002 | 0.001 | 0 | 0 |
| 2 | 0.114 | 0.015 | 0.005 | 0.002 | 0.001 | 0 |
| 3 | 0.241 | 0.032 | 0.012 | 0.004 | 0.001 | 0 |
| 4 | 0.41 | 0.055 | 0.02 | 0.008 | 0.002 | 0.001 |
| 5 | 0.619 | 0.083 | 0.03 | 0.011 | 0.003 | 0.001 |
| 6 | 0.867 | 0.117 | 0.042 | 0.016 | 0.004 | 0.001 |
| 7 | 1.153 | 0.155 | 0.055 | 0.021 | 0.005 | 0.002 |
| 8 | 1.476 | 0.199 | 0.071 | 0.027 | 0.007 | 0.002 |
| 9 | 0.247 | 0.088 | 0.034 | 0.009 | 0.002 | |
| 10 | 0.301 | 0.107 | 0.041 | 0.01 | 0.003 | |
| 15 | 0.637 | 0.226 | 0.087 | 0.022 | 0.006 | |
| 20 | 1.084 | 0.386 | 0.147 | 0.038 | 0.011 | |
| 25 | 1.638 | 0.583 | 0.223 | 0.057 | 0.016 | |
| 30 | 0.816 | 0.312 | 0.08 | 0.023 | ||
| 35 | 1.086 | 0.415 | 0.106 | 0.03 | ||
| 40 | 0.531 | 0.136 | 0.039 | |||
| 45 | 0.66 | 0.169 | 0.048 | |||
| 50 | 0.206 | 0.059 | ||||
| 60 | 0.288 | 0.082 | ||||
| 70 | 0.383 | 0.11 | ||||
| 80 | 0.14 | |||||
| 90 | 0.175 | |||||
| 100 | 0.212 | |||||
| 110 | 0.253 | |||||
| 120 | 0.297 | |||||
Your premier manufacturer and distributor of CSST plumbing products.
Subscribe to our Newsletter
© 2023 Easyflex. All Rights Reserved.
